The Cisco VPN Client has a highly secure remote connectivity and is additionally gaining popularity globally. Despite, its exceptional features, a standard error that is usually encountered by users on a daily basis, is Cisco VPN Error 412. This article helps you to get over this irritating situation.
What Are The Causes Behind Cisco VPN Error 412?
Here is a list of probable causes that can lead to real-time Cisco VPN Error 412. Have a look:
- The most basic reason behind the occurrence of the error is the failure in either network device or network interface card.
- The Internet connection may not be stable, and there can be network packets that are interfering with the server.
- Network package from the server might not be reaching your computer.
- A system firewall might be blocking the required protocols for appropriate functioning of the VPN.
- If you place the client computer following a NAT device and at the same time if the VPN server has a disable mode for NAT-T, then it will eventually lead to an error message.
Before proceeding to the troubleshooting methods, you should know the underlying causes. If you can deduce the root cause of an error, then the problem is more likely to be resolved faster.
How Can You Fix Cisco VPN Error 412?
First, you need to verify whether the Cisco VPN client has an appropriate setting for the setup. There are a vast array of additional troubleshooting measures that you can try to resolve the problem. Let us go through the essential quick hacks that can help you to sort the issue on the go.
Step 1: Check And Change Connection
If your computer has access to the Internet employing WiFi connectivity, then you need to try to connect using an Ethernet. You can also opt to use USB connection to link your device with internet. This process will help you to reduce the possibility of insufficient connectivity. Additionally, it will also reduce the error occurrence.
Step 2: Disable Firewall Temporarily
You can try to turn off the computer’s firewall settings. Test the VPN connection and notice if the error reappears. If the error is no longer visible, then the cause was due to faulty port connections. You can also try to change the firewall settings which can grant access to UDP ports. For the Cisco VPN client to function accurately, these UDP ports are essential.
However, if the error persists, then you need to follow the steps mentioned below.
Step 3: Enable NAT-T/TCP Option
Often the problem can occur if the NAT-T/TCP option is disabled. In that case, you need to turn on the option in your profile. Additionally, you need to unblock the port 10000.
Are you still looking for solutions to fix the 412 Error?