Driver Power State Failure Windows 10: Hassle-Free Ways To Fix

You may see a Blue Screen error when resuming your device from Sleep or Hibernate mode, which is also known as the Windows 10 issue of driver power state failure. For any hardware driver, this BSOD is mostly the result of the incompatible driver. A simple reboot can fix this problem over time. In some cases, users are stuck with such driver power state failure error while installing the pending Windows update. Whenever you are in such a situation, restarting your PC in Safe Mode is recommended, this process will definitely help you overcome this situation. In some cases, such a problem may also occur due to the power settings. There are also some other circumstances that are responsible for this glitch. To be familiar with them closely, you can therefore go ahead and follow the guidelines below for a quick fix on this glitch.

A Detailed Survey on Windows 10 blue screen driver power state failure

As we have already mentioned, a problem caused by a driver-related issue or power settings is the blue screen driver power state failure issue. But, luckily, the issue can be handled relatively well. But let’s know the other errors mostly encountered by users before proceeding to the troubleshooting section. Therefore, we have enlisted some other issues in the section below that most users reported.

Diver power state failure Windows 10 in Toshiba, HP, Dell, Acer, Alienware, Samsung, Sony, Lenovo:

This issue affects most of the devices, and multiple Dell, HP, and Lenovo users have complained the same issue:

Driver power state failure Nvidia:

Such kind of issue usually related to the Nvidia graphics. Therefore, if you are running Nvidia graphics card, then you might face this problem.

Driver power state failure USB:

While using a particular USB device, driver power state failure USB error occurs. If you also encounter the same issue, then you need to remove all the USB devices to find out the problematic one.

Driver power state failure on startup, boot:

Most of the users have reported that while booting their PC, they find this error. Thus, if you also encounter the same issue then you can update the device drivers if it works to fix the issue.

Driver Power State Failure Photoshop, AutoCAD:

This issue can affect multiple programs and most of the users have reported it while using AutoCAD or Photoshop, such kind of issue occurs.

Driver power state failure SSD, hard drive:

Most of the cases, such issue occurs due to new hardware. So, whenever, you face this situation, you need to reinstall the device drivers.

Driver power state failure blue screen:

Usually, this error triggered by a driver related issue. But, this issue has been easily fixed by the Microsoft in update file KB 2983336

Driver power state failure Kerpersky, McAfee:

This issue usually appears due to software from third parties. Security software can also cause this failure to occur sometimes. According to the user, find this problem when using Mcafee or Kaspersky. So, if you’re using the third party software as well, you can also cope with this issue.

Driver power state failure ntoskrnl.exe:

ntosrnl.exe can cause such error. So, if you also face the same issue then you have to run the SFC scan.

Wondering “how to fix driver power state failure Windows 10?”

When the users see the Blue Screen of Death, they start to panic. But, we can assure you that there are a number of ways that can fix this issue. Just go through the fixes carefully and implement accordingly:

Solution @1: Update device drivers

Whenever you encounter Windows 10 failure of driver power state, it is recommended that you update the drivers of the device. According to the users, the BSOD issue will be removed after updating the device drivers, so you can also try this fix. To do so, follow the following steps:

  • Firstly, go to the Start icon and select the Device Manager from the menu.
  • Then, simply expand the category with the hardware you required to update.
  • Once you select the hardware, simply right-click on that device and press the Update Drivers button.
  • After that, look for and choose the Browse My Computer For Driver Software button.
  • Now, select the Browse button.
  • Then, follow the on-screen directions in order to finish the further process.

Solution @2: Enter into the Safe Mode and remove the recently installed drivers

You need to access the advanced startup to do this process. You must therefore enter the BIOS and set the first CD / DVD Drive boot. Next, just reset the Microsoft Windows 8.1 DVD boot to the CD / DVD drive. Just reboot your device after that. You will be prompted to enter a key to boot from the DVD / CD once your device reboots. Just left click on the device once you’ve finished, or hit the next button. Then search the Repair Your Computer button on the next screen and select it. Now open a new window where you need to click the Troubleshoot option.

Furthermore, go to the Advanced options and simply click on the Command Prompt button. Now, in the Command Prompt enter the following lines: BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY. Now, hit the enter button or click on the OK button. Therefore, remove the Windows disc and simply press the Reboot button in order to reload your system.

After that, the next step is to enter the Safe Mode and remove all the device drivers that have recently been installed. So you need to press the F8 key after rebooting your device. A list of options will be provided by this process. You must select the Safe Mode option from the list options. Simply open the Device Manager once your device starts in the Safe mode. Once you do this, all the recently installed drivers need to be uninstalled. To do so, just right-click them and hit the Driver option to uninstall. Now, check whether the problem has been removed. If not, try the next one.

Solution @3: Perform SFC scan

If you randomly receive the error message ‘ driver power state failure Windows 10,’ you can easily remove this problem by performing SFC scanning. Mostly, due to corrupted system files, this issue occurs. Therefore, you may need to perform this action to fix such corrupted files. To do this, follow the following steps:

  • Primarily, press the Windows + X function keys simultaneously in order to launch the Win+X menu.
  • Once you are done, simply click on the Command Prompt (Admin). In case, if you don’t find the Command Prompt (Admin) in the list then you can also choose the PowerShell (Admin) button.
  • Next, when the Command Prompt open the in the Command Prompt, simply type “sfc/scannow”
  • Then, simply, hit the enter button.
  • But keep in mind this process will take some time to complete. Thus, do not interrupt the process.
  • Once the process is over, see if the issue gets fixed.

Solution @4: Reset your Power settings

Power settings can cause this problem. So, resetting your power settings is advised yo. So, to start the Run box, you must press the Windows logo key + R keys together. Now, just enter the’ Control Panel’ in the Run box and hit the Enter key. Next, choose it from the list of results. Now, please. From the Small Icons Control Panel window, select the Power Option. You need to locate the Balanced button once you’re done. Now just check this option and select the settings for the Change Plan. Now select the Advanced Power Settings button to change and expand the Wireless Adapter Settings. Simply go to the Power Saving Mode once you perform this action and reset the setting to the Maximum Performance. In addition, PCI Express and Link State Power Management need to be expanded. Simply reset the settings to the Maximum Power Savings once you’re done. Finally, hit both the application option and the OK button. All you need to do is restart your PC and see if the problem solves.

Solution @5: Change your Power Plan settings

Furthermore, you can also fix such driver power state failure Windows 10 issue by modifying your power plan settings. To do that, you have to follow the given steps:

  • First of all, you need to go to the Power Options then find out your recently selected plan.
  • Now, press the Change Plan Settings and look for the Change Advanced Power Settings button.
  • Once you find it, simply click on that button and then a list of settings appear on the screen.
  • Therefore, simply go to the Sleep section and set the Sleep and Hibernation options as Never.
  • After that, navigate to the Power Buttons and Lid section and be sure that everything is set as Do Nothing.
  • Once you perform this action, click on the Apply button and Ok button in order to save the new changes.

Solution @6: Disable or uninstall Security software

We all know the security software is quite important but it can interface with your system and also cause a number of problems like BSOD. Therefore, it is recommended that you disable certain features of that software to resolve such an error. But if the problem remains after disabling, you must uninstall or remove that particular software from your device. But later you can install it. So if you’re in the same situation, you can uninstall or delete your security program by following the instructions below: first go to the Start icon and then click the Settings button. Now, select the Settings menu system. Next, hit the left panel Apps & Features button. Now select the software that you need to delete or uninstall. Once you’ve finished, simply press the pop-up Uninstall button on the display screen. Wait a while now to complete the process.

Solution @7: Revert your graphics card drivers to the previous version

They found this glitch because of their faulty or corrupted graphics card driver, according to the users. We therefore recommend returning your graphics card driver to the previous version and checking if this method works. By carrying out these directions, you can do this process:

  • Primarily, go to the Device Manager.
  • Then, navigate to the Display Adapter section.
  • There, you have to double-tap on your graphics card.
  • Next, in the properties windows, simply click on the Driver tab and select the Roll Back Driver option.
  • Once you are done, wait for the process to complete.

Solution @8: Reset your device’s power options

If none of the above solutions work, the answer may be to reset the power options of your device. So, by following the instructions below, you can simply do this action: basically hit the start icon and look for the Device Manager. Now, select the Device Manager from the result list. You must therefore find your network adapter, just double tap it and go to its properties once you find it. Following this process, go to the Power Management tab where the Allow The ComputerTo Turn Off This Device To Save Power button must be located. Just make sure the button is unchecked once you locate it. Now, to save new changes, press the Apply button as well as the OK button. We hope you will find these methods quite helpful in solving such a BSOD error in Windows 10. But when you try these methods, if you face any difficulty, you can get in touch with a professional to solve this problem.