Windows 10 Operating System offers too many features, but without WiFi or internet connection, it is of no use. Surprisingly, in Windows 10 system the most common problem you may face is WiFi keeps disconnecting Windows 10. So if you are facing the same, no need to worry about it. As this is not impossible to fix, checking the basics should fix the issue in most of the cases.
However, without determining the primary cause of the issue, fixing would be a real troublesome matter. Also, it may consume a lot of time. In that case, if you want a speedy relief, contact their tech support team. WiFi keeps disconnecting windows 10 could be one of the trickiest problems you may ever face.
Reason Behind Windows 10 WiFi Issue
There could be some reasons misbehaving behind such windows 10 wifi issue. However, without knowing the main reason, treating the error may take longer than usual. It is essential to diagnose the fault to be clear about the failure. If you think dealing with the technical issue is not your thing, don’t worry, we are here to help you.
If you are confident enough, you may try your hands on the issue. In the context of this error, the first thing you need to check, the internet connection or the router you are connected to. If everything appears to be fine, then check the WiFi driver. You can also check the Autoconfiguration service.
Fix WiFi Keeps Disconnecting Windows 10
Windows 10 WiFi keeps disconnecting? There are many ways to resolve this issue, based on the status of the error. However, these are the basic easy to follow steps you can follow to address the issue.
First, go to the network and sharing center. Click on the WiFi icon in the bottom of the window and select the option. Navigate to the change adaptor setting and click on it.
Here you need to click on the WiFi adaptor properties and configure the properties. After that go to the power management tab uncheck the option to turn off the device and save power.
In the second step, you need to reset the Autoconfig service. To reset the service, open the Run window, and type “service.msc” then press enter to continue with the process.
At this point, you need to double-click on the WLAN Autoconfig to open the window. Now set the option to the automatic and press enter to apply the changes.