Epson error code 0xEA is very common in the printers. This usually occurs when the carriage caddy gets jammed. The reason for can be anything something stuck inside the printer. Or the cartridges were not inserted properly. New printers usually face this error. It is because of an error in the configuration and installation of the printer.
The best way to tackle this error to see if something is holding the carriage caddy back. There could be a piece of paper or packaging material that was left inside. Also, make sure that the cartridges are set up properly. Here’s what and how you can deal with the error.
- 1 How to Fix Epson Error Code 0xEA?
- 1.0.1 Look for packaging tape or paper stuck inside-
- 1.0.2 Reinsert the cartridge-
- 1.0.3 Use a little force-
- 1.0.4 No, don’t break the printer or its parts. Sometimes, the little clip that moves under the ink tank holder holds it back. Just push the tank holder all the way over to the other side and it will work.
- 1.0.5 Use smart troubleshooter tool-
How to Fix Epson Error Code 0xEA?
Usually, the error with the Epson printers is very common. Thus you can fix it on your own in most of the time. However, at times, it takes a lot of effort to troubleshoot it. Wondering how to fix Epson Printer Error Code 0xEA? Here are a few solutions.
Look for packaging tape or paper stuck inside-
Sometimes, a little piece of packaging tape or a previously stuck page stays hidden inside the printer. It can break the movement of the caddy, causing the error. If you find anything stuck inside the printer, remove it. It will solve the problem.
Reinsert the cartridge-
Improper fixing of the cartridges can make you encounter the error. Just remove the cartridges and reinsert them properly. If you are unable to do that, call the Support experts. They will send a technician at your doorstep for fixing your cartridge problems.
Use a little force-
No, don’t break the printer or its parts. Sometimes, the little clip that moves under the ink tank holder holds it back. Just push the tank holder all the way over to the other side and it will work.
Use smart troubleshooter tool-
Take the help of smart troubleshooter tool to fix your issues. It is generally known for troubleshooting the Epson printer error code 0xEA. It cleans all the registry issues that could be causing the error. Along with that, it also checks for other errors. If found any, it will automatically deal with them. Run your printer again after following the steps. Hopefully, you were able to fix the error. If not, there’s one last thing you can try by yourself.
Use Epson 0xEA repair tool-
Download the tool and run it. Select the scan now option and wait for the scan to finish. If it identifies some errors, click on the Fix icon. The repair tool will begin fixing the errors. Once the tool finished its work, you can try restarting your printer.